Yanmar K4sc Replacement Mini Rubber Tracks For Excavators 200 X 72 X 41mm

-----------------------------------------------------------------------------------------------------------------------------------------------

1.Product Information
 

-----------------------------------------------------------------------------------------------------------------------------------------------

2.Special Features of the POOYERT Rubber Tracks

- 3 Metal Cores Wound Up: Higher durability & Better flexibility

- Smaller Contact Surface (Smaller Lug): Better grip & traction

- Bi Directional: Tracks are Interchangeable

- Reinforced Edges Between Lugs: Decreasing the chance of slicing

- Jointless: Track is much stronger than the joint type
 

-----------------------------------------------------------------------------------------------------------------------------------------------

3.Why choose rubber track?

*Less ground damage
Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft ground than steel tracks.

*Low Noise
A benefit to equipment operating in congested areas, rubber tracks make less noise than steel tracks.

*High speed
Rubber tracks permit machines to travel at a higher speed than steel tracks.

*Less vibration
Rubber tracks insulate machine and operator from vibration, extending the service life of machine and decreasing operator's fatigue.

*Low ground pressure
The ground pressure of rubber tracks equipped machinery can be fairly low, about 0.14-2.30kg/m2, a major reason for its use on wet and soft terrain.

*Superior traction
The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled vehicles of the same weight.

*Light machinery weight
Rubber track's pulling performance being twice that of wheels, it permits the lighter vehicles equip with rubber track to do the same pulling work than that of wheeled vehicles.

-----------------------------------------------------------------------------------------------------------------------------------------------

4. The notice of using rubber tracks

1.Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm when the machine is lifted. Readjust when the tension decreases. (Be careful because the rubber crawler may come off if the tension is too low).

2.Avoid projections from the frame around the rubber crawler, especially on its inner circumference. (Rubber crawlers are easily deformed; if it comes into contact with the frame, an accident such as the rubber being cut can occur).

3.Avoid sharp projections when travelling.

4.Avoid turning too fast on concrete roads with a high coefficient of friction because this can cause accidents such as cutting the rubber.

5.Be careful that no oil, ect adheres to the rubber track. If it does, wipe it off immediatedly.

6.When storing for long periods, keep indoors, away from direct sunshine and rain.

7.Replace as soon as possible when abrasion of the sprockets is observed.

-----------------------------------------------------------------------------------------------------------------------------------------------